710 MINI-SIT 0.710.740 FRYER THERMOSTATIC GAS VALVE 120-200°C THERMOSTAT & GLAND

SIT 710 Gas Thermostat Valve for Commercial Fryers, Pasta Boilers | 120°C - 200°C

This listing is for 1 x SIT Gas Thermostat Valve, ideal for various commercial kitchen appliances such as fryers, pasta boilers, and more. Compatible with popular brands including Falcon, Mareno, Zanussi, and many others. This valve integrates a thermostat and flame failure device in a single unit, ensuring both precision and safety.

Product Features:

• Manufacturer: SIT
• Type Series: 710 (MINI-SIT)
• Temperature Range: 120°C - 200°C
• Inlet: 1/2" BSP
• Outlet: 3/8" BSP
• Thermocouple Connection: M9 x 1
• Capillary Length: 1050mm
• Bulb (Sensor): 6mm Diameter x 90mm Length
• Gland Thread: M14 x 1.5
• Supplied With: Plastic body and control knob

This valve can be identified by the number printed on the rating plate, and while it is an 'off-the-shelf' product purchased directly from SIT, some manufacturers may modify the valve to suit their specific appliances.

Note: This listing includes the gas valve and one elbow, as shown in the picture. If you need additional elbows, we can supply them at an extra cost.

Suitable OEM Replacement for the Following Part Numbers:

• 0710740 SIT

Applications: Ideal replacement for use in commercial fryers, pasta boilers, and other similar appliances that require reliable temperature regulation and flame safety.

Note: Please check the rating plate on your appliance to ensure compatibility.

Please be aware that gas components should only be installed and serviced by a qualified professional. DIY installation by an unqualified individual is strongly discouraged, and it is against the law to perform any work on a gas appliance without the necessary certifications. These parts come with a 30-day warranty, but due to an increase in DIY repairs, most manufacturers will not accept claims for defective items if they were installed by someone without proper training. If a part is found to be faulty upon installation, manufacturers now require an official engineer’s report, including details such as the appliance’s model, serial number, and a technical explanation of the fault. Warranty claims must be supported by the engineer’s report and the work must have been completed by a registered gas-safe engineer. For any warranty claims, you will need to provide the gas-safe certification details of the engineer as well as the appliance information. Should you need any assistance or help in locating a qualified engineer, feel free to contact us for support.

If you need technical assistance, feel free to contact us  directly on 07506 525030.

Thank you for your time